Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9821947

- Product Categories
- Friendly Links
Information Name: | Yamaha outboard boat motors two-stroke 2 |
Published: | 2013-09-17 |
Validity: | 0 |
Specifications: | |
Quantity: | 21.00 |
Price Description: | |
Detailed Product Description: | Model: YAMAHA - 2CMHS Power: 1.5KW/4500 turn (2 hp) Engine type: two stroke / single cylinder Displacement: 50cc Fuel: premixed (built-in tank / petrol and two-stroke oil 50:1 mix) Maximum fuel consumption / hour: 1.3L stern board height: 417mm Cooling system: water-cooled Starting system: Handle Weight: 10kg outboard Caution: outboard engine oil and engine oil recommended to use unleaded gasoline, at least 87 octane gasoline. Use of poor quality gasoline can cause reduced engine life, starting difficulties and other engine failure. Note Because gasoline evaporation, accidental spark could cause an explosion or fire, so do not smoke near gasoline, not to petrol tank filled to overflow, adding gasoline to the fuel tank before you stop the engine oil should use genuine TCW3 oil, not recommend the use of other two-stroke engine oil. Do not mix different brands of engine oil, or a mixture of different brands of the same brand of oil may cause different types of gel, resulting in a sieve filter clogging due to insufficient lubrication which can cause serious engine damage. Unleaded petrol and oil mixing ratio mixing ratio of 50:1, note ten hours run-in period, the mixing ratio of 25:1 routine inspections Fuel system: 1. Checks the amount of fuel in the tank. Action: Re-install 2 Tim. Check the fuel filter in the slag or water measures: wash 3 Check rubber hoses for fuel Xialou measures: replacement of electrical equipment: 1. Check that the main switch is functioning correctly Action: Replace 2 Check whether the battery power is low measures: Charge 3 Check battery terminals for loose measures: retighten 4 Check stop switch is functioning correctly and make sure the lock version in place. Action: correct or replace 5. Check the wiring for loose or damaged. Action: correct or replace 6 Check whether the spark plug wear and dirt pick carbon. Action: Clean or replace the throttle system: 1. Checking the carburetor throttle solenoid and valve function is normal. Action: Replace 2 Check the carburetor when turning the throttle handle and magnetic engine is working properly. Action: correct recoil starter: 1 Check for damage and wear rope measures: Replace 2 Check whether the hook snaps measures: correct or replace the clutch propeller: In checking operation and remote control shift lever, the clutch engages correctly Measures: adjustable 2. Visually inspect the propeller blades are bent replace 3 Check for loose propeller nut, bolt displacement engine installation: 1. Check all the engine fixing nut on board measures: Tighten 2 Check putter ended Installation of cooling water: 1. checks after starting the engine if there is water from the cooling water discharge port inspection tools and spare parts: 1. Check replace the spark plug, propeller and other tools and spare parts 2 Check you with rope steering device: 1. Check steering handle and the remote control to operate other parts: 1. checks anode is securely installed (2) Check the anode for corrosion and deformation Repair or replace if necessary Mahon Customer qq1359499595 Tel 13262641289 |
Admin>>>
You are the 5587 visitor
Copyright © GuangDong ICP No. 10089450, Shanghai Wang Outboard Limited All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 5587 visitor
Copyright © GuangDong ICP No. 10089450, Shanghai Wang Outboard Limited All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility